Dongguan Jinzhuang Hydraulic Technology Co., Ltd.
Phone:18925801679
Mobile:18925801679
Fax:0769-22705317
Address:Dongguan Wan Jiang area countryside community old ninki 1
model | HCN-FA does not rotate reciprocating flange (basic type / with induction type) |
Specification | 1.Using pressure range 5-140KG/CM2 2.Using speed range 8-100mm/sec 3.Using temperature range -10+80 |
Instructions |
It is generally composed of a cylinder, a cylinder rod, and a seal. The inside of the cylinder is divided into two parts by a piston, respectively, through an oil hole. Because of the small compression ratio of the liquid, when one of the oil holes enters the oil, the piston will be pushed to make the other oil hole out of the oil, and the piston will drive the piston rod to extend (retract) and vice versa. Manually pressurized stalks (hydraulic manual pump) allow the hydraulic oil to enter the cylinder through a single valve. At this time, the hydraulic oil entering the cylinder cannot be reversed because of the single valve, forcing the cylinder rod upwards, and then continuing to make the hydraulic oil continue to work. Into the hydraulic cylinder, so it continues to rise, when you want to drop the hydraulic valve, hydraulic oil back to the tank. 1. Small size, saving installation space, standardization specifications 2. Direct installation without additional accessories 3. Applicable to molds, machining fixtures or mechanical space where installation space is limited |
Materials | Stainless steel, aluminum alloy, 45# steel |
Service | One year warranty |
Dongguan Jin Zhuang hydraulic technology co., LTD | |
region | China/dongguan |
address | Dongguan Wan Jiang area countryside community old ninki 1 |
TEL | 0769-22708489、22708943 、22705257 |
FAX |
0769-22705317
|